Shelf-End and Compartment for long things

Vertical bulkhead with cutouts

The interior of the walls were made from 1/4" baltic birch, routed flush with the perimeter frames. Unfortunately, baltic comes in 5'x5' sheets, so we ended up with a seam on each wall. On the curbside wall, the seam was covered with a vertical bulkhead that holds the end of the shelves. The lower part of this bulkhead has some cutouts for shoes and anything else. The bottom shelf has a longitudinal bulkhead which creates an enclosed compartment. The front of this compartment is accessible through the vertical bulkhead cutouts, while the rear portion goes through the rear bulkhead into the galley with the purpose of storing long objects

Where the long thing compartment goes through the rear bulkhead